Solulub 971

牌号Solulub 971
厂家Axiall Corporation
分类Slip Agent / Lubricant / Mold Release / Processing Aid
介绍Solulub 971 is a solid, complex ester lubricant.

Solulub 971:
  • Is a solid lubricant for PVC powder compound extrusion.
  • Imparts good initial colour to PVC compounds. It is commonly used in exterior solid extrusion applications with various loadings of filler, between 0 and 15 phr typically. The accelerated weathering properties of Solulub 971 are comparable to those of the most common lubricant combinations used in similar applications.
  • Is a balanced lubricant that lowers the viscosity of the PVC compounds during manufacturing. The use of Solulub 971 in a typical profile formulation is between 2.8 and 3.8 phr. Because of its inherent fusion enhancing properties, additional internal lubrication is not, typically required. The addition of metal release agents at 0.1 to 0.15 phr has been reported for complex extrusions with reduced filler levels.
  • Has a relatively high melting range, but the flakes are brittle even at room temperature, this helps to achieve a full dispersion during the dry blending operations. The use of Solulub 971 has been reported to enhance the powder flow properties of dry blends when compared to dry blends containing stearates.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
Axiall Corporation 产品展示 种类
Solulub 128 Slip Agent / Lubricant / Mold Release / Processing Aid
Solulub 907 Slip Agent / Lubricant / Mold Release / Processing Aid
Solulub 140 Slip Agent / Lubricant / Mold Release / Processing Aid
Solulub 162 Slip Agent / Lubricant / Mold Release / Processing Aid
Soluaid 211 Slip Agent / Lubricant / Mold Release / Processing Aid
Soluaid 106 Slip Agent / Lubricant / Mold Release / Processing Aid
Solulub 971 Slip Agent / Lubricant / Mold Release / Processing Aid
Solulub 163 Slip Agent / Lubricant / Mold Release / Processing Aid
Solulub 903 Slip Agent / Lubricant / Mold Release / Processing Aid
Solulub 912 Slip Agent / Lubricant / Mold Release / Processing Aid

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved