Technicure® MDU-11

牌号Technicure® MDU-11
厂家A&C Catalysts, Inc.
分类Plasticizer
介绍Technicure® MDU-11 is an aromatic substituted urea based accelerator 4,4' Methylene bis (Phenyl Dimethyl Urea) for use as an accelerator for dicyandiamide (DICY) to produce highly shelf-stable one-part systems. Technicure MDU-11 is an excellent accelerator for adhesives, powder coatings, prepregs and reinforcements. At levels of 5phr full cure can be accomplished in less than and hour at 100C and less than 5 minutes at 150C when used with approximately 8 phr of DICY and bisphenol A epoxy resin, EEW 190. Room temperature shelf lifes of resins compounded with Technicure MDU-11 for stable for well over 6 months.

ADVANTAGES
  • Long Pot Life
  • Fast Cure
  • High Tg's
  • Excellent Accelerator for Dicyandiamide
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
A&C Catalysts, Inc. 产品展示 种类
Technirez® RME-912 Plasticizer
Ajicure® PN-31 Plasticizer
Technicure® Imidazole Curing Agents 2-MI Plasticizer
Technicure® Imidazole Curing Agents EMI-24LV Plasticizer
Technicure® Imidazole Curing Agents EMI-24 Plasticizer
Technicure® TDU-20 Plasticizer
Technicure® LC-80 Plasticizer
Technicure® MDU-11 Plasticizer
Ajicure® PN-40 Plasticizer
Technicure® LC-100 Plasticizer

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved