Teflon® PTFE 7C X

牌号Teflon® PTFE 7C X
厂家DuPont Fluoropolymers
分类PTFE
介绍Teflon ® PTFE 7C X is a white powder with small particle size. Its most unique feature is the irregular, fibrous character of the particles. The small particle size of Teflon ® PTFE 7C X helps to minimize voids even at relatively low molding pressures. The fibrous particles promote good capture and uniform distribution of inorganic fillers when they are added to modify the mechanical properties of moldings. Teflon ® PTFE 7C X exhibits relatively high mold shrinkage. Teflon ® PTFE 7C X is preferred for moldings requiring optimum mechanical and electrical properties. Its relatively low bulk density limits the size of moldings from a given mold or press opening. It is often preferred for making filled compounds, especially with metal powders that are difficult to mix because of density differences.

Properly processed products made from neat Teflon ® PTFE 7C X provide the superior properties typical of the fluoropolymer resins: retention of properties after service at 260 °C (500 °F), useful properties at -240 °C (-400 °F), chemical inertness to nearly all industrial chemicals and solvents, and low friction and antistick surfaces. Dielectric properties are outstanding and stable with frequency and temperature. Molded products have moderate stiffness and high ultimate elongation. In a flame situation, products of Teflon ® PTFE 7C X resist ignition and do not themselves promote flame spread. When ignited by flame from other sources, their contribution of heat is small and with very little smoke. Statements, or data, regarding behavior in a flame situation are not intended to reflect hazards presented by this or any other material when under actual fire conditions.

Typical Applications
Many end products are molded or fabricated from moldings of Teflon ® PTFE 7C X, or made with filled compounds based on Teflon ® PTFE 7C X. The filled compounds provide a wide choice of modified mechanical properties. End products using Teflon ® PTFE 7C X include skived film and sheet, gaskets, bridge or pipeline bearing pads, piston rings, and diaphragms.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
DuPont Fluoropolymers 产品展示 种类
Teflon® PTFE DISP 35 PTFE
Teflon® PTFE DISP 33 PTFE
Teflon® PTFE 6CN X PTFE
Teflon® PTFE 6C X PTFE
Teflon® PTFE 605XT X PTFE
Teflon® PTFE 7A X PTFE
Teflon® PTFE 669 X PTFE
Teflon® PTFE 8A X PTFE
Teflon® PTFE DISP 30 PTFE
Teflon® PTFE CFP 6000 X PTFE

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved