Carpenter No. 158® Alloy

牌号Carpenter No. 158® Alloy
厂家Carpenter Technology Corporation
分类Steel
介绍Carpenter No. 158® alloy is a chrome-nickel alloy steel with an analysis representing the best case hardening steel known for parts subject to heavy shock and wear.

This alloy is ideally suited for jobs where an extra measure of core strength is required. Fully treated, Carpenter No. 158 alloy attains a core strength of approximately 160 ksi (1103 MPa) tensile strength with a yield point of approximately 135 ksi (931 MPa). These high mechanical properties will be developed in sections up to 5" (127 mm) thick. In addition, case hardened articles possess a higher wear resistant case because of the special alloy content of the steel.

Applications:
Carpenter No. 158 alloy should be considered for use in very large parts requiring maximum strength, wear resistance, and toughness. Typical applications have included heavy-duty gears, shafts, clutch parts, piston pins, chain rollers, chain bushings, wrist pins, boring bars, cutting shanks, jig bars, clutch levers, ratchets, power tool shafts, power tool cams, rock drill assemblies, balls, arbors, broach holders, clutch pins, pneumatic tool parts, and rolls for aluminum rolling machines.

This alloy should also be considered for use in replacement parts for finished assemblies where the load on a particular part has been underestimated or where space or weight limitations prevent redesigning for heavier parts. Breakage at such troublesome spots can frequently be eliminated through the use of Carpenter No. 158 alloy.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
Carpenter Technology Corporation 产品展示 种类
Pyromet® Alloy 882 Steel
EnduraMet® 316LN Stainless Steel
Gall-Tough® Stainless Steel
Carpenter Stainless Type 420 Mold Steel Steel
Carpenter Stainless Type 347 Steel
Carpenter Stainless Type 420 Steel
Micro-Melt® M62 Alloy Steel
Carpenter Stainless Type 430F Solenoid Quality Steel
EnduraMet® 2205 Stainless Steel
Pyromet® Alloy 355 Steel

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved