牌号 | DYNAMAR™ Polymer Processing Additive FX 5922 |
厂家 | 3M Advanced Materials Division |
分类 | Slip Agent / Lubricant / Mold Release / Processing Aid |
介绍 | Dynamar PPA FX 5922 is a free-flowing fluoropolymer-based processing additive that is designed for use at very low levels to improve the processing of polyolefins. At the very low use levels (typically 100 - 800 ppm) necessary to improve processing, it does not alter or detract from the good physical properties associated with high strength plastics. Special Features
Typical Properties Dynamar PPA FX 5922 lowers apparent melt viscosity and permits fabricators to use high strength resins which otherwise could not be processed on available equipment. As a processing additive Dynamar PPA FX 5922 can reduce or eliminate melt fracture and can reduce extruder torque. Through optimization of the extrusion process, the use of FX 5922 may also allow an increase in output and yield films with enhanced and balanced bi-directional physical properties and improved clarity and gloss. Typical Applications Dynamar PPA FX 5922 can offer performance and cost advantages. It exhibits exceptional commercial utility in low melt index film grade linear low density polyethylene (LLPDE) and high density polyethylene (HDPE). It is especially effective in polyolefin resins containing talc and silica-based anti-blocking agents, titanium dioxide-based pigments, and other inorganic additives. It can also be used at low levels to reduce extruder die build-up when processing LDPE, EVA and other polyolefin resins. |
3M Advanced Materials Division 产品展示 | 种类 |
---|---|
Dyneon™ FLUOROELASTOMER FX 11818 | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ FLUOROELASTOMER FX 3735 | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ FLUOROELASTOMER FE 5623 | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ PTFE TF 1645 | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ FLUOROELASTOMER FT 2430 | Slip Agent / Lubricant / Mold Release / Processing Aid |
DYNAMAR™ Polymer Processing Additive FX 5912 | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ PTFE TF 2072Z | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ PTFE TF 9205 | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ TFM™ 1705 | Slip Agent / Lubricant / Mold Release / Processing Aid |
Dyneon™ FLUOROELASTOMER FC 2178 | Slip Agent / Lubricant / Mold Release / Processing Aid |
订购说明