| 牌号 | Dyneon™ FLUOROELASTOMER FX 11818 |
| 厂家 | 3M Advanced Materials Division |
| 分类 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| 介绍 | 3M™ Dyneon™ Flouroelastomer FX 11818 can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formulations. The "dry" ingredients should be blended before adding to the masticated gum. For best results, Dyneon FX 11818 should be banded on the mill several minutes prior to adding the blended dry ingredients. Once mixed, the compounded stocks have good scorch resistance and storage stability. |
| 3M Advanced Materials Division 产品展示 | 种类 |
|---|---|
| DYNAMAR™ POLYMER PROCESSING ADDITIVE FX 5917 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ FLUOROELASTOMER FE 5623 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ PTFE DISPERSION TF 5070GZ | Slip Agent / Lubricant / Mold Release / Processing Aid |
| DYNAMAR™ Polymer Processing Additive FX 5920A | Slip Agent / Lubricant / Mold Release / Processing Aid |
| DYNAMAR™ Polymer Processing Additive FX 5911 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ POLYMER ADDITIVE PA 5959 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ FLUOROELASTOMER FT 2320 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ FLUOROELASTOMER FT 2350 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ FLUOROELASTOMER FC 2211 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ PTFE TF 9205 | Slip Agent / Lubricant / Mold Release / Processing Aid |
订购说明
