| 牌号 | Dyneon™ FLUOROELASTOMER FC 2152 |
| 厂家 | 3M Advanced Materials Division |
| 分类 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| 介绍 | 3M™ Dyneon™ Fluoroelastomer FC 2152 can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formulations. The "dry" ingredients should be blended before adding to the masticated gum. For best results, Dyneon FC 2152 should be banded on the mill several minutes prior to adding the blended dry ingredients. Once mixed, the compounded stocks have good scorch resistance and storage stability. |
| 3M Advanced Materials Division 产品展示 | 种类 |
|---|---|
| Dyneon™ PTFE TF 5033Z | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ FLUOROELASTOMER FT 2430 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ FLUOROELASTOMER MIP 8740 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ POLYMER ADDITIVE PA 5958 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ FLUOROELASTOMER FX 3735 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| DYNAMAR™ POLYMER PROCESSING ADDITIVE FX 5917 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ POLYMER ADDITIVE PA 5959 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ FLUOROELASTOMER FC 2178 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ PTFE TF 1641 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| DYNAMAR™ Polymer Processing Additive FX 5914 | Slip Agent / Lubricant / Mold Release / Processing Aid |
订购说明
