| 牌号 | Dyneon™ FLUOROELASTOMER FE 5840Q |
| 厂家 | 3M Advanced Materials Division |
| 分类 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| 介绍 | 3M™ Dyneon™ Fluoroelastomer FE 5840Q can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formulations. The "dry" ingredients should be blended before adding to the masticated gum. For best results, Dyneon FE 5840Q should be banded on the mill several minutes prior to adding the blended dry ingredients. Once mixed, the compounded stocks have good scorch resistance and storage stability. |
| 3M Advanced Materials Division 产品展示 | 种类 |
|---|---|
| DYNAMAR™ Polymer Processing Additive FX 5920A | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ PTFE TF 5060GZ | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ FLUOROELASTOMER FC 2176 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ PTFE TF 5035Z | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ PTFE DISPERSION TF 5050Z | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ FLUOROELASTOMER FX 3734 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ PTFE TF 1645 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ FLUOROELASTOMER LTFE 6400 Z | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ FLUOROELASTOMER FC 2178 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ FLUOROELASTOMER MIP 8780 | Slip Agent / Lubricant / Mold Release / Processing Aid |
订购说明
