DYNAMAR™ Polymer Processing Additive FX 9613

牌号DYNAMAR™ Polymer Processing Additive FX 9613
厂家3M Advanced Materials Division
分类Slip Agent / Lubricant / Mold Release / Processing Aid
介绍3M™ Dynamar™ FX 9613 is a free flowing granular concentrate form of a fluoropolymer designed for use at very low levels to improve the processing of thermoplastics. At the very low use levels (typically 50 -1000 ppm) necessary to improve processing, it does not alter or detract from the good mechanical properties associated with high strength plastics.

FX 9613 exhibits exceptional commercial utility in low melt index film grade polyolefins such as linear low density polyethylene (LLDPE) and higher molecular weight, high density polyethylene (HMW-HDPE) resins. It can also be used at low levels to reduce extruder die build-up when processing LDPE, EVA and other polyolefin resins.

FX 9613 lowers apparent melt viscosity and permits processors to use high strength resins which otherwise could not be processed on available equipment. Now with the aid of FX 9613, fabricators can produce superior films and other articles of improved strength and quality.

As a polymer processing additive, FX 9613 can reduce or eliminate melt fracture and can reduce extruder torque. Through optimization of the extrusion process, the use of FX 9613 may also allow an increase in output and yield films with enhanced and balanced bi-directional physical properties and improved clarity and gloss.

Special Features
  • Broadens extrusion processing capabilities of polyolefin resins
  • Ideal for use in low melt index LLDPE and high molecular weight HDPE resins
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
3M Advanced Materials Division 产品展示 种类
DYNAMAR™ Polymer Processing Additive FX 9614 Slip Agent / Lubricant / Mold Release / Processing Aid
Dyneon™ FLUOROELASTOMER FG 5690Q Slip Agent / Lubricant / Mold Release / Processing Aid
Dyneon™ PTFE TF 9201Z Slip Agent / Lubricant / Mold Release / Processing Aid
Dyneon™ PTFE DISPERSION TF 5050Z Slip Agent / Lubricant / Mold Release / Processing Aid
Dyneon™ PTFE DISPERSION TF 5033Z Slip Agent / Lubricant / Mold Release / Processing Aid
Dyneon™ PTFE TF 1645 Slip Agent / Lubricant / Mold Release / Processing Aid
Dyneon™ PTFE TF 1641 Slip Agent / Lubricant / Mold Release / Processing Aid
Dyneon™ PTFE TF 5035Z Slip Agent / Lubricant / Mold Release / Processing Aid
Dyneon™ PTFE TF 1750 Slip Agent / Lubricant / Mold Release / Processing Aid
Dyneon™ PTFE TF 2072Z Slip Agent / Lubricant / Mold Release / Processing Aid

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved