| 牌号 | Dyneon™ FLUOROELASTOMER FC 2211 |
| 厂家 | 3M Advanced Materials Division |
| 分类 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| 介绍 | 3M™ Dyneon™ Fluoroelastomer FC 2211 can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formulations. The "dry" ingredients should be blended before adding to the masticated gum. For best results, Dyneon FC 2211 should be banded on the mill several minutes prior to adding the blended dry ingredients. Once mixed, the compounded stocks have good scorch resistance and storage stability. |
| 3M Advanced Materials Division 产品展示 | 种类 |
|---|---|
| Dyneon™ FLUOROELASTOMER FC 2177D | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ PTFE TFM 1700 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ FLUOROELASTOMER FC 2211 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ POLYMER ADDITIVE PA 5959 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ PTFE TF 9205 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ FLUOROELASTOMER FC 2178 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ FLUOROELASTOMER FC 2170 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| Dyneon™ PTFE TF 5033Z | Slip Agent / Lubricant / Mold Release / Processing Aid |
| DYNAMAR™ Polymer Processing Additive FX 5914 | Slip Agent / Lubricant / Mold Release / Processing Aid |
| DYNAMAR™ Polymer Processing Additive FX 5920B | Slip Agent / Lubricant / Mold Release / Processing Aid |
订购说明
