Escoat® P-20 Solids

牌号Escoat® P-20 Solids
厂家Mayzo
分类Antiblock
介绍Escoat® P-20 Solids is a non-silicone product especially produced and widely used for pressure sensitive labels, film and tapes. Its high degree of purity, quality and tight melting point range offers superior properties and performance to critical users. Escoat® P-20 Solids is used on films with adhesives based on natural rubber, SBR, SIS, acrylic, etc. primarily for obtaining release in self wound tapes where tight peel is mandatory. Escoat® P-20 Solids is expected to give a peel strength 2-3 times the level expected from most silicone release agents. In addition, the non-stick properties of the Escoat® P-20 Solids resin find use in a wide range of applications outside the pressure sensitive area.

Characteristics: At a solids level of approximately 10%, Escoat® P-20 Solids generally forms a reversible gel on standing. The stiffness of the gel depends upon the temperature and the concentration of the non-volatile materials present. The reversible gel may be dissolved back into the solution with very moderate temperature increases. Due to unknown flammability hazards of toluene and other solvents every precaution should be taken to prevent the consequences of incorrect handling. Homogeneous solutions are also obtained with other aromatic and aliphatic hydrocarbons, chlorinated solvents, and esters. Polar solvents, such as alcohols, should be avoided, as they tend to cause precipitation. To avoid inconvenience of gel formation during coating operation, levels of 1% solids or less are recommended provided suitable coating techniques are available to give uniform consistent coating.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
Mayzo 产品展示 种类
Escoat® WFX 120 Antiblock
BNX® 1098 Antiblock
BNX® B1171 Antiblock
Escoat® P-20 Solids Antiblock
Escoat® WPX 40 Antiblock
MAYZO RA-120W Antiblock
BNX® MD-1097 Antiblock
MAYZO RA-10C Antiblock
BNX® 1112 Antiblock
MPM® 2000 Antiblock

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved