SE 4740

牌号SE 4740
厂家Braj Binani Group
分类Compatibilizer / Adhesion Promoter
介绍3B Direct Rovings consist of continuous Advantex® glass filaments bonded into a single strand and wound into a bobbin shape. A proprietary sizing applied on the fibres assures an excellent resin-to-glass bonding. SE4740 Direct Roving's sizing provides excellent adhesion to Acrylic Thermoplastic resins as revealed by high shear strength as well as high inter-laminar fracture toughness energy. SE4740 Direct Rovings are specifically designed for production of Woven Rovings and Non Crimped Fabrics. These fabrics can then be used as inputs for T-RTM or infusion technologies. It is recommended not to use SE4740 Direct Rovings in systems other than Acrylic Thermoplastic resins.

FEATURES AND BENEFITS
Boron-free E-CR glass
  • -High corrosion resistance
Medium to high strand integrity
  • -High productivity and high quality parts in Woven Rovings and Non Crimped Fabrics productions
Compatibility with Acrylic Thermoplastic resins
  • -Optimum transverse tensile strength
  • -Optimum inter-laminar shear strength
  • -Designed for Structural Composites
Globally available
  • -Get flexibility in manufacturing the highest quality wherever you are

Advantex® glass is a boron-free glass and presents significantly improved corrosion resistance across a wide range of aggressive environments. Advantex® glass is an E-CR glass in accordance with ASTM D578 and ISO 2078. This translates into important benefits for end-users over traditional E glass: longer service life, larger safety coefficients for the same design, and material savings. Traditional E-glass includes boron and often contains added fluorides. By using new manufacturing technology to eliminate these components from the glass composition, Advantex® glass has become a benchmark for integrated pollution prevention and the highest energy efficiency, all in an optimized process. 3B measures its efforts and works continually to minimize its impact on the environment and to set new standards within the global fibreglass industry. This is our commitment.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
Braj Binani Group 产品展示 种类
CFM M6060 Compatibilizer / Adhesion Promoter
CFM M 8615 Compatibilizer / Adhesion Promoter
R 25H Compatibilizer / Adhesion Promoter
CFM M 8610 Compatibilizer / Adhesion Promoter
CS 122Y 14P Compatibilizer / Adhesion Promoter
CFM M6065 Compatibilizer / Adhesion Promoter
Braj Binani 399 Direct Rovings Compatibilizer / Adhesion Promoter
HiPer-tex™ W3030 Compatibilizer / Adhesion Promoter
111 A Compatibilizer / Adhesion Promoter
CFM CM 4020 Compatibilizer / Adhesion Promoter

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved