DYNAMAR™ POLYMER PROCESSING ADDITIVE FX 5917

牌号DYNAMAR™ POLYMER PROCESSING ADDITIVE FX 5917
厂家3M Advanced Materials Division
分类Slip Agent / Lubricant / Mold Release / Processing Aid
介绍3M™ Dynamar™ Polymer Processing Additive FX 5917 is a pellet fluoropolymer based processing additive that is designed for use at low levels to improve processing of polyolefins such as LLDPE, mLLDPE, and HDPE for cast film and pipes extrusion.
At the typical low use levels (200-1000 ppm) necessary to improve polyolefin processing, FX 5917 has no influence on the surface and mechanical properties.

Special Features
  • Copolymer of VF2 (Vinylidenefluoride) and HFP (Hexafluoropropylene)
  • Eliminates melt fracture
  • Lowers apparent melt viscosity
  • Broadens extrusion processing capabilities of polyolefin resins
  • Reduces or eliminates die build-up
  • Can offer performance and cost advantages

Typical Properties
Dynamar PPA FX 5917 can offer performance and cost advantage by direct comparison to other processing additives. It provides exceptional productivity benefit when used in high density polyethylene (HDPE) and in linear low density polyethylene (LLDPE) processing. It can also be used at very low levels to reduce extruder die build-up when processing LDPE, EVA and other polyolefin resins.

Typical Applications
As a processing additive Dynamar PPA FX 5917 reduces or eliminates melt fracture and can reduce extruder torque. Through optimization of the extruder process, the use of FX 5917 may also allow to postpone the appearance of die lip build up in cast film processing resulting in a higher yield and reducing interfacial instability in the extrusion of multi-layer films.
在线客服:  点击这里给我发消息 点击这里给我发消息 上海松翰塑胶
申请技术报告方式

可通过以下我公司客服QQ,索要技术报告

客服1:点击这里给我发消息 客服2:点击这里给我发消息
3M Advanced Materials Division 产品展示 种类
DYNAMAR™ Polymer Processing Additive FX 5922 Slip Agent / Lubricant / Mold Release / Processing Aid
DYNAMAR™ Polymer Processing Additive FX 5912 Slip Agent / Lubricant / Mold Release / Processing Aid
DYNAMAR™ Polymer Processing Additive FX 9614 Slip Agent / Lubricant / Mold Release / Processing Aid
Dyneon™ PTFE TF 1645 Slip Agent / Lubricant / Mold Release / Processing Aid
Dyneon™ PTFE DISPERSION TF 5033Z Slip Agent / Lubricant / Mold Release / Processing Aid
Dyneon™ PTFE TF 2072Z Slip Agent / Lubricant / Mold Release / Processing Aid
Dyneon™ PTFE TF 2025Z Slip Agent / Lubricant / Mold Release / Processing Aid
Dyneon™ PTFE TF 1641 Slip Agent / Lubricant / Mold Release / Processing Aid
DYNAMAR™ Polymer Processing Additive FX 5920B Slip Agent / Lubricant / Mold Release / Processing Aid
Dyneon™ FLUOROELASTOMER FC 2174 Slip Agent / Lubricant / Mold Release / Processing Aid

订购说明

上海松翰塑化科技有限公司订货流程

【订购导引】
       我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
       如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告,请您通过电话或是客服QQ与我联系!

【物流说明】
       自接到贵司订购单24小时内发货,珠三角,长三角,北京,天津均支持代收货款。货物送达后,请第一时间检查外包装,如发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存,并在24小时内与我司客服部取得联系。


【订购流程】
订货流程



【退换货处理】
退货:
依照中华人民共和国消费者保护法规,在您收到货品7天内,若发现您收到的商品有瑕疵或损坏,您可以要求退货,请主动与本公
司联络,敝公司接到您的商品之后,会将您的购物金额全额退回。

换货:
若您收到的商品有瑕疵或损坏,请您于7天内与本公司联络,本公司有专人处理换货事宜。
版权所有 © Shshsj.com All Rights Reserved